Treadmill Control Board Replacement Guide

Have more questions? Submit a request

Replacing The Control Board 

 

STEP 1: Turn off and unplug the treadmill from its power source.

motor_test_step_1_pt_2.jpg motor_test_step_1.jpg

STEP 2: Remove all screws from the base of the treadmill frame.

motor_test_step_2.jpg

STEP 3: Take a photo (or make a note) of the control board so you can reference the wire positioning. 

motor_test_step_3_pt_2.jpg

STEP 4: Unplug all of the wires from the control board optional (pliers to remove wires).

motor_replacement_step_4.jpg

STEP 5: Remove the securing screws that connect the control board to the frame.

motor_test_step_6.jpg motor_test_step_6_pt_2.jpg

STEP 6: Remove the control board and insert the replacement board. 

motor_test_step_7.jpg motor_test_step_6.jpg

STEP 7: Secure the replacement board to the frame of the treadmill.

motor_test_step_7.jpg motor_test_step_7_pt_2.jpg

STEP 8: Reconnect the wires to the control board as shown in the photo or notes made. Wires connected to the wrong ports are a safety hazard. 

motor_test_step_8.jpg

For more information, please see the video below:

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.