Correcting The Belt Pulley Bracket Alignment
Step 1: Remove the pedals (Remember left pedals will be reverse threaded).
Step 2: Using a cross-head screwdriver remove all of the screws from the covers.
Step 3: Remove the belt.
Step 4: Remove the bolt using an Allen Wrench and the nut using an Adjustable Wrench (For the opposite nut you will have to hold the internal nut with a wrench as well shown below).
Step 5: Remove the nut from the magnet bar, then remove the bolt using an Allen Wrench.
Step 6: Remove the metal bar and then loosen the nut on the top of the magnet bar holder to remove the holder.
Step 7: Remove Flywheel
Step 8: Install washer/spacer between the flywheel and the tension bracket
Step 9: Install Flywheel back onto the mainframe (Reminder please make sure the belt is on the flywheel and the tension bracket with the spacer before installing).
For more information, please see the video below:
Please sign in to leave a comment.