Carlos-Technical-Team-T2

  • Total activity 134
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 2
  • Subscriptions 57

Articles

Votes on activity by Carlos-Technical-Team-T2
  • Pulley Block Replacement

    How to replace the Pulley Block  Here is a quick guide to properly replacing the pulley block on the stepper.    (Tools required: Adjustable Wrench & Allen Wrench)   STEP 1: Use an Allen wrench an...

    • Edited
    • 1 follower
    • 0 comments
    • -3 votes
  • Adjusting/Aligning The Running Belt (SF-T1407M)

    Adjusting The Running Belt   Belt Shifting to the right  If the Running Belt moves to the right, turn the Adjustable Bolt on the right side ¼ turn clockwise,then turn the left Adjustable Bolt ¼ t...

    • Edited
    • 1 follower
    • 0 comments
    • -3 votes
  • Stepper Hydraulic Cylinder Replacement

    How To Replace The Hydraulics On A Stepper (Tools Required Adjustable Wrench & Allen Wrench) STEP 1: Use the adjustable wrench to secure the nut as you use an Allen wrench to remove the bolt from ...

    • Edited
    • 1 follower
    • 0 comments
    • -4 votes
  • Stepper Cable Installation Guide

    How To Install Your Stepper Cable   STEP 1: With the pedometer facing you, lift up the pedal to loosen the stepper cable.   STEP 2: With the pedal raised, place the loosened cable onto the pulley a...

    • Edited
    • 2 followers
    • 0 comments
    • -5 votes
  • Recumbent Bike Noise Check

    If your recumbent bike starts making noise it's always best to get the issue resolved as fast as possible before the sound gets worse. Please follow these steps on checking your Recumbent bike if i...

    • Edited
    • 1 follower
    • 0 comments
    • -6 votes
  • Aligning & Tightening Your Running Belt

    ALIGNING THE BELT—PART ONE To align the belt, turn the Left & Right side adjustment bolts one full turn clockwise usingthe Allen Wrench that your model came with. Continue the process until the bel...

    • Edited
    • 1 follower
    • 0 comments
    • -6 votes
  • General Rower Sensor/Meter Troubleshooting Guide

    How to troubleshoot the sensor and meter on a Rower   Here is a quick guide instructing you on the steps to take when troubleshooting the sensor and meter on a Rower.    STEP 1: Remove the pedals w...

    • Edited
    • 1 follower
    • 0 comments
    • -8 votes
  • Recumbent Bike Pedal Assembly Guide (SF-RB4708)

    Pedal Assembly  STEP 1: Many Sunny Health & Fitness machine parts come preassembled to save you time during the assembly process. To install the pedals on the SF-RB4708, you’ll need an alloy bushin...

    • Edited
    • 1 follower
    • 0 comments
    • -9 votes
  • Stepper Cable Replacement

    How to Remove a Stepper Cable  (Tools required: Adjustable Wrench & Allen Wrench) STEP 1: Use an Allen Wrench and adjustable wrench to loosen the nuts and bolts (counterclockwise) that secure the ...

    • Edited
    • 2 followers
    • 0 comments
    • -9 votes
  • External Squeaks & Creaks For Bikes

    Machines with many moving parts can sometimes make noise. To minimize this, ensure your equipment is regularly maintained according to the User Manual. Place it on a solid, stable surface, avoiding...

    • Edited
    • 1 follower
    • 0 comments
    • -10 votes