Carlos-Technical-Team-T2

  • Total activity 133
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 2
  • Subscriptions 56

Articles

Votes on activity by Carlos-Technical-Team-T2
  • How To Lubricate Your Treadmill

    Lubricating the Treadmill IMPORTANT NOTE: You will need to lubricate your treadmill before the first use. WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricatin...

    • Edited
    • 1 follower
    • 0 comments
    • 30 votes
  • X-Crank Removal (SF-RB4708, 4631, 4703, 4880)

    Recumbent Bike X-Crank Removal  STEP 1: Set the resistance lever to the highest setting on the bike. STEP 2: Remove the pedal from the recumbent bike. (Note: left pedals will be reverse threaded) ...

    • Edited
    • 1 follower
    • 0 comments
    • 4 votes
  • Treadmill Power Switch Replacement

    How to replace the Power Switch on the treadmill    Here is a quick guide instructing you on the replacement of the treadmill power switch.    STEP 1: As a safety precaution, unplug the unit from t...

    • Edited
    • 1 follower
    • 0 comments
    • 3 votes
  • Treadmill Control Board Replacement Guide

    Replacing The Control Board    STEP 1: Turn off and unplug the treadmill from its power source. STEP 2: Remove all screws from the base of the treadmill frame. STEP 3: Take a photo (or make a no...

    • Edited
    • 1 follower
    • 0 comments
    • 2 votes
  • Clearing the "OIL" reminder message on your treadmill

    How to clear the "01L" message on your treadmill Here is a quick guide to assist you in the proper procedure to clear the "oil" message on your treadmill after lubricating the running deck.    Your...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote
  • Standard Meter Reset

    How to reset the meter on your unit    Here is a quick guide that will assist you with the reset process of your meter   STEP 1: Press and Hold the RED button for four seconds     STEP 2: The scree...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote
  • Simple Bearing Replacement

    How to replace the simple bearing    Here are the steps required to properly replace the simple bearing on your recumbent bike.   STEP 1: Remove the Nylon Nut (part 59L and or 60R) using an adjusta...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote
  • Split Crank Removal (SF-B1709)

    Cycle Bike Split Crank Removal STEP 1: Locate the crank arm. Unscrew the hex bolt by inserting an Allen Wrench and turning it counter-clockwise.  STEP 2: When the hex bolt is loose, pull the cran...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote
  • Cycle Bike Meter or Sensor Troubleshooting

    Meter or Sensor Issues If your meter is not calculating the distance or caloric burn and shutting down on you after 5 minutes or so you will want to check down the sensory chain. You are looking fo...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote
  • Motor Testing And Troubleshooting

    Diagnosing Your Treadmill STEP 1: Turn off and unplug your machine.  STEP 2: Remove the treadmill motor top cover. (held together by 4-5 screws along the side of the motor cover) STEP 3: Remove...

    • Edited
    • 1 follower
    • 0 comments
    • 1 vote