How to remove the covers on your recumbent elliptical bike
Here is a quick guide instructing you on the proper procedure to successfully remove the covers from your unit.
STEP 1: Using a Phillips screwdriver remove all five screws from the left side cover.
STEP 2: Remove the screws from the right side cover, please be mindful that there is a plastic holder that needs to need to be lifted to access a screw that holds both covers.
STEP 3: After removing all of the screws, carefully open the covers from the top.
STEP 4: Once open, remove the left side first and hold on to the right side so that the DC wire isn't damaged pulling the covers apart.
STEP 5: Using a crescent wrench loosen the nut holding the DC wire, you may use your fingers to completely unscrew it off.
For more information, please see the video below: