1. Sunny Health and Fitness
  2. Bikes
  3. Troubleshooting

Recumbent Tension System Assembly

Updated
Chelsea
Have more questions? Submit a request

Tension Cable Troubleshooting Guide

STEP 1: Twist the resistance knob to the lowest setting to loosen the top tension cable, which will increase the cable length.

recumbent_tension_step_1.png 

 STEP 2: Pull the bottom tension cable hook from the bottom post. 

recumbent_tension_step_2.png

STEP 3: Slide the tensioner cable under the hooking clasp to secure it to the bottom hook.

recumbent_tension_step_3.png

STEP 4: When attached, tug the top tension cable against the bottom tension hook to secure the cables. 

recumbent_tension_step_4.png

STEP 5: Connect the top and bottom signal wires. Tuck the secured cable and the wire into the posts and bolt the posts together.

recumbent_tension_step_5.png

For more information, please see the video below: 

Articles in this section

See more
Was this article helpful?
2 out of 8 found this helpful
Share

Comments

0 comments

Article is closed for comments.