1. Sunny Health and Fitness
  2. Bikes
  3. Troubleshooting

X-Crank Removal (SF-RB4708, 4631, 4703, 4880)

Updated
Carlos-Technical Team (T2)
Have more questions? Submit a request

Recumbent Bike X-Crank Removal 

STEP 1: Set the resistance lever to the highest setting on the bike.

x_crank_4631.png

STEP 2: Remove the pedal from the recumbent bike. (Note: left pedals will be reverse threaded)

x_crank_4631_2.png

STEP 3: Remove the plastic cap on the crank cover and turn the crank puller counterclockwise to remove the cover nut. 

x_crank_4631_3.png x_crank_4631_3_pt_2.png

STEP 4: Screw the crank puller into the opening on the crank. x_crank_4631_4.png x_crank_4631_4_pt_2.png

STEP 5: Screw the crank puller clockwise into the cover threading. Screw the silver end of the crank puller clockwise until the x-crank is removed from the bike.

x_crank_4631_5.png mceclip0.png

x_crank_4631_5_pt_2.png

STEP 6: Uninstall the x-crank from its cover by removing any securing screws. 

x_crank_4631_6.png

For more information, please see the video below:

Articles in this section

See more
Was this article helpful?
4 out of 4 found this helpful
Share

Comments

0 comments

Article is closed for comments.