SF-B1851: How to Remove and Install the Covers

Have more questions? Submit a request

SF-B1851: How to Remove and Install the Covers

STEP 1: Remove the left pedal (14L) and the right pedal (14R) from the unit using a spanner tool or a wrench.

(NOTE: Please do keep in mind that the left pedal is reverse threaded.)

STEP 2: Remove the three screws (Part 62) from the Right Belt Cover (Part 24) and the screw on the Front Cover (Part 25).

mceclip0.png

STEP 3: Remove the 5 screws (Part 61) from the Left Belt Cover (Part 23).

mceclip1.png

 

STEP 4: Place the right crank (Part 15R) at a 45° angle and guide the covers through the crank arm and around the pedals to remove.

mceclip2.png

STEP 5: Place the left crank (Part 14L) at a 45° angle and twist on the Crank Cover (Part 26) to guide the covers through the crank arm and around the pedals to remove.

mceclip3.png

STEP 6: To install keep the pedals at a 45° angle and guide the covers back to their original spots and screw the covers with the screws you originally removed.

 

For more information, see the video below.

Articles in this section

Was this article helpful?
0 out of 0 found this helpful
Share

Comments

0 comments

Article is closed for comments.