SF-T722076 How to Replace The Console

How to replace the console on your treadmill

Here is a quick guide instructing you on the proper procedure when replacing the console on your treadmill.


STEP 1: Using a Phillips screwdriver, remove the screws from the bottom of the console.


STEP 2: Carefully slide the holder.


STEP 3: Using a Phillips screwdriver, remove the cover screws.


STEP 4: Remove the cover to disconnect the signal wire.

STEP 5: Repeat the steps in reverse for the installation. 


For more information, please see the video below:





Articles in this section

Was this article helpful?
0 out of 0 found this helpful



Article is closed for comments.