SF-B1851 - Synergy Pro Magnetic Indoor Cycling Bike Assembly

This video will guide you through the assembly of your Sunny Health & Fitness Indoor Cycle Bike, SF-B1851. Inside your package, you’ll find all the necessary tools, a hardware package, and a user manual to make the setup process smooth and straightforward. Each section is time-stamped for your convenience, making it easy to navigate and complete the necessary assembly process.

TABLE OF CONTENT

🔧 0:09 | Remove the rear shipping tube from the main frame
🔧 0:18 | Remove the front shipping tube from the main frame
🔧 0:27 | Attach the front stabilizer to the main frame
🔧 0:47 | Attach the rear stabilizer to the main frame
🔧 1:05 | Loosen & pull out the adjustment knob; Insert the handlebar into the main frame; Tighten the adjustment knob
🔧 1:16 | Attach the handlebar onto the handlebar post; Tighten with the allen wrench
🔧 1:31 | Connect the monitor wires to the handle pulse wire & sensor wire
🔧 1:43 | Insert the monitor into the computer bracket
🔧 1:47 | Attach the water bottle holder to the main frame
🔧 2:00 | Attach the dumbbell holder to the main frame
🔧 2:12 | Attach the left foot pedal to the left crank; Tighten counter-clockwise
🔧 2:24 | Attach the left nylon nut; Tighten clockwise
🔧 2:33 | Attach the right foot pedal to the right crank; Tighten clockwise
🔧 2:44 | Attach the right nylon nut; Tighten counter-clockwise

At Sunny Health & Fitness, we’re dedicated to ensuring you have the best experience with our products. For any assistance with parts or troubleshooting, please don’t hesitate to reach out to us at support@sunnyhealthfitness.com or call us at (877) 907-8669.

Additionally, you can access the user manual directly through this link: SF-B1851 User Manual for convenient reference throughout your assembly process.