SF-B1877 - Endurance Belt Drive Magnetic Indoor Exercise Cycle Bike Assembly

This video will guide you through the assembly of your Sunny Health & Fitness Indoor Cycle Bike, SF-B1877. Inside your package, you’ll find all the necessary tools, a hardware package, and a user manual to make the setup process smooth and straightforward. Each section is time-stamped for your convenience, making it easy to navigate and complete the necessary assembly process.

TABLE OF CONTENT

🔧 0:08 Remove the seat post & flip 180 degrees; Reinsert & tighten with adjustment knob
🔧 0:16 Remove the shipping tube; Attach the rear stabilizer to the main frame
🔧 0:24 Remove the shipping tube; Attach the front stabilizer to the main frame
🔧 0:37 Align the right pedal with the right crank; Tighten clockwise
🔧 0:49 Attach the right nylon nut; Tighten counter-clockwise
🔧 0:55 Align the left pedal with the left crank; Tighten counter-clockwise
🔧 1:04 Attach the left nylon nut; Tighten clockwise
🔧 1:10 Remove the screws from the main frame
🔧 1:18 Attach the bottle holder to the main frame with two screws
🔧 1:40 Insert the seat slider into the seat post; Tighten the adjustment knob
🔧 1:44 Secure the seat to the seat slider
🔧 1:57 Insert the handlebar post into the main frame; Tighten the adjustment knob
🔧 2:04 |Secure the handlebar to the handlebar post
🔧 2:27 Attach the monitor wires to the handle pulse wire & trunk wire
🔧 2:33 Attach the monitor to the bracket on the handlebar post
🔧 2:38 Remove the screw from the handlebar & attach the handlebar cover to the handlebar with the screw

At Sunny Health & Fitness, we’re dedicated to ensuring you have the best experience with our products. For any assistance with parts or troubleshooting, please don’t hesitate to reach out to us at support@sunnyhealthfitness.com or call us at (877) 907-8669.

Additionally, you can access the user manual directly through this link: SF-B1877 User Manual for convenient reference throughout your assembly process.