SF-B1970 - Pro Lite Indoor Cycling Bike Assembly

This video will guide you through the assembly of your Sunny Health & Fitness Indoor Cycle Bike, SF-B1970. Inside your package, you’ll find all the necessary tools, a hardware package, and a user manual to make the setup process smooth and straightforward. Each section is time-stamped for your convenience, making it easy to navigate and complete the necessary assembly process.

TABLE OF CONTENT

🔧 0:09 | Remove the front shipping tube from the main frame
🔧 0:18 | Attach the front stabilizer to the main frame
🔧 0:29 | Attach the rear stabilizer to the main frame
🔧 0:38 | Remove the wood shipping blocks
🔧 0:44 | Align the right pedal with the right crank; Tighten clockwise
🔧 0:58 | Screw the right nylon nut counter-clockwise
🔧 1:05 | Align the left pedal with the left crank; Tighten counter-clockwise
🔧 1:17 | Screw the left nylon nut clockwise
🔧 1:27 | Connect the trunk wire to the sensor wire
🔧 1:36 | Loosen L shape Knob & insert handlebar post; Tighten L Knob
🔧 1:42 | Attach the handlebar to the handlebar post
🔧 1:59 | Attach the device holder to the handlebars
🔧 2:03 | Insert the monitor to the handlebar bracket
🔧 2:07 | Connect pulse sensor wire & trunk wire to the monitor wires
🔧 2:12 | Attach the seat slider to the seat post
🔧 2:19 | Remove the screws & washers from the main frame
🔧 2:25 | Attach the bottle holder to the main frame using the screws & washers that were removed

At Sunny Health & Fitness, we’re dedicated to ensuring you have the best experience with our products. For any assistance with parts or troubleshooting, please don’t hesitate to reach out to us at support@sunnyhealthfitness.com or call us at (877) 907-8669.

Additionally, you can access the user manual directly through this link: SF-B1970 User Manual for convenient reference throughout your assembly process.