Stepper Cable Replacement

How to Remove a Stepper Cable 

stepper_hydraulic_replacement.jpg

(Tools required: Adjustable Wrench & Allen Wrench)

STEP 1: Use an Allen Wrench and adjustable wrench to loosen the nuts and bolts (counterclockwise) that secure the stepper cable on both sides of the stepper. 

stepper_cable_replacement_1.jpg

stepper_cable_replacement_1_pt_2.jpg stepper_cable_replacement_1_pt_3.jpg

STEP 2: Twist the height adjustment knob counterclockwise until it is removed from the frame. Afterward, remove the cable and pulley. 

stepper_cable_replacement_2.jpg stepper_cable_replacement_2_pt_2.jpg

STEP 3: Reattach the cable, pully, and height adjustment knob. 

stepper_cable_replacement_3_pt_2.jpg

STEP 4: Reattach the nuts, bolts, and cable to both sides of the frame of the stepper with the Allen Wrench.

stepper_cable_replacement_4.jpg

STEP 5: Use the adjustable wrench to tighten both bolts clockwise. 

stepper_cable_replacement_5.jpg stepper_cable_replacement_5_pt_2.jpg

For more information, please see the video below:

Articles in this section

Was this article helpful?
1 out of 11 found this helpful
Share

Comments

0 comments

Article is closed for comments.