SF-RB4936 - Stationary Cross Trainer Recumbent Bike Assembly

This video will guide you through the assembly of your Sunny Health & Fitness Recumbent Bike, SF-RB4936. Inside your package, you’ll find all the necessary tools, a hardware package, and a user manual to make the setup process smooth and straightforward. Each section is time-stamped for your convenience, making it easy to navigate and complete the necessary assembly process. 

TABLE OF CONTENT

🔧 0:09 |  Attach the front stabilizer to the main frame
🔧 0:21 | Attach the rear stabilizer to the main frame
🔧 0:32 | Attach the seat adjusting tube to the main frame
🔧 0:43 | Attach the brake handle to the seat adjusting tube
🔧 0:52 | Remove the screws from the seat
🔧 0:57 | Attach the seat to the seat support bracket
🔧 1:13 | Remove the screws from the backrest cushion
🔧 1:17 | Attach the backrest cushion to the seat support backrest
🔧 1:26 | Attach the handlebar to the seat support bracket
🔧 1:41 | Connect the flexible wire to the handle pulse wire
🔧 1:45 | Remove the six screws and six washers from the main frame
🔧 1:55 | Attach the tension control wire to the metal bracket of the tension wire
🔧 2:00 | Connect the handle pulse wire to the flexible wire; Connect the sensor wire to the extension sensor wire
🔧 2:05 | Attach the front post to the  main frame with six screws and six washers that were removed
🔧 2:33 | Remove the screw from the rotation rod
🔧 2:39 | Insert the rotation rod to the front post tube; Attach left and right swing tubes
🔧 2:54 | Tighten and secure the screws to the rotation rod (secure right side while rotating left side)
🔧 3:05 | Insert the right pedal to the connecting rod; Screw into the right crank clockwise
🔧 3:20 | Screw the right nylon nut and spring washer to the pedal counter-clockwise
🔧 3:25 | Insert the left pedal to the connecting rod; Screw into the left crank counter-clockwise
🔧 3:38 | Screw the left nylon nut & spring washer to the pedal clockwise
🔧 3:42 | Attach the right handlebar to the right swing tube
🔧 3:51 Attach the left handlebar to the left swing tube
🔧 4:01 | Remove the screws from the monitor
🔧 4:06 | Connect the extension sensor wire to the monitor wire
🔧 4:13 | Attach the monitor to the front post
🔧 4:21 | Plug the handle pulse wire into the monitor jack

At Sunny Health & Fitness, we’re dedicated to ensuring you have the best experience with our products. For any assistance with parts or troubleshooting, please don’t hesitate to reach out to us at support@sunnyhealthfitness.com or call us at (877) 907-8669.

Additionally, you can access the user manual directly through this link: SF-RB4936 User Manual for convenient reference throughout your assembly process.