SF-E321005: Pedal and Pedal Support Replacement

Have more questions? Submit a request

SF-E321005: How to Replace the Pedal Support and the Pedal

STEP 1: Remove the bolts (Part 27) from the pedal arm (Part 44) using a #5 Allen wrench.

Step1.JPG

STEP 2: Using a flathead screwdriver, remove the end cap (Part 46) from the pedal arm. 

Step2.JPG

STEP 3: Remove the bolt (Part 11) from the crank arm and remove it from the crank.

Step3.JPG

STEP 4: Remove the bolts (Part 53) under the pedal (Part 43L).

Step4.jpg

STEP 5: Replace the Pedal Support Tube and/or Pedal and install it into the unit.

For further information, please see the video below.

Articles in this section

Was this article helpful?
1 out of 9 found this helpful
Share

Comments

0 comments

Article is closed for comments.